P.D. Sales Agency
Confirmed Licenses
A comprehensive directory of our authorized testing capabilities, strictly categorized according to our confirmed laboratory licenses, government approvals, and regulatory accreditations.
Confirmed License List
| SR No. | IS Code | IS Name |
|---|---|---|
| 01 | IS 15907:2010 | Agro Textiles – High Density Polyethylene (HDPE) Woven Beds For Vermiculture – Specification |
| 02 | IS 15351 : 2015 | Agro Textiles – Laminated High Density Polyethylene (HDPE) Woven Geomembrane For Waterproof Lining – Specification (Second Revision) |
| 03 | IS 14927 : PART 2:2001 | Cable Trunking Systems And Cable Ducting Systems For Electrical Installations Part 2-1: Particular Requirements Cable Trunking Systems And Cable Ducting Systems Intended For Mounting On Walls And Ceilings First Revision |
| 04 | IS 11066:2014 | Fibre Ropes - Polyester - 3-, 4-, 8- And 12- Strand Ropes (Third Revision) |
| 05 | IS 12709:1994 | Glass-Fibre Reinforced Plastics (GRP) Pipes, Joints And Fittings For Use For Potable Water Supply - Specification (First Revision) |
| 06 | IS 2062:2011 | Hot Rolled Medium And High Tensile Structural Steel - Specification (Seventh Revision) |
| 07 | IS 13450-2 | Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 37 Ultrasonic Medical Diagnostic And Monitoring Equipment |
| 08 | IS 694:2010 | Polyvinyl Chloride Insulated Unsheathed And Sheathed Cables/Cords With Rigid And Flexible Conductor For Rated Voltages Up To And Including 1 100 V (Fourth Revision) |
| 09 | IS 15058:2002 | PVC Water - Stops At Transverse Contraction Joints For Use In Masonry And Concrete Dams - Specification |
| 10 | IS 2553-1 | Safety Glass - Specification: Part 1 Architectural, Building And General Uses (Fourth Revision) |
| 11 | IS 9537 (Part 3):1983 | Specification For Conduits For Electrical Installations: Part 3 Rigid Plain Conduits Of Insulating Materials |
| 12 | IS 7903:2017 | Textiles - Tarpaulins Made From High Density Polyethylene (HDPE) Woven Fabrics - Specification (Fifth Revision) |
| 13 | IS 14650:2023 | Unalloyed And Alloyed Steel Ingot And Semi-Finished Products For Re-Rolling Purposes - Specification (First Revision) |
| 14 | IS 651:2007 | Glazed Stoneware Pipes And Fittings - Specification (Sixth Revision) |
| 15 | IS 398 : PART 2:1996 | Aluminium Conductor For Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision) |
| 16 | IS 398 : PART 4:1996 | Aluminium Conductors For Overhead Transmission Purposes: Part 4 Aluminium Alloy Stranded Conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
| 17 | IS 15298 : PART 2:2016 | Personal Protective Equipment Part 2 Safety Footwear (Iso 20345 : 2021, Mod) (Third Revision) |
| 18 | IS 14968:2015 | Textiles - High Density Polyethylene (HDPE)/Polypropylene (Pp) Woven Sacks For Packing 50 Kg/25 Kg Sugar - Specification (First Revision) |
| 19 | IS 14887:2014 | Textiles - High Density Polyethylene (HDPE)/Polypropylene (Pp) Woven Sacks For Packaging Of 50 Kg Food Grains - Specification (First Revision) |
| 20 | IS 16008 : PART 1:2016 | Agro Textiles – Shade Nets For Agriculture And Horticulture Purposes – Specification Part 1 Shade Nets Made From Tape Yarns (First Revision) |
| 21 | IS 16008 : PART 2:2016 | Agro Textiles – Shade Nets For Agriculture And Horticulture Purposes – Specification Part 2 Shade Nets Made From Mono Filament Yarns (First Revision) |
| 22 | IS 649 | Registration For Stamping |
| 23 | IS 3419 | Specification For Fittings For Rigid Non - Metallic Conduits (Second Revision) |
| 24 | IS 17954 | Telescopic Ball Bearing Drawer Slide - Specification |
| 25 | IS 12786 | Irrigation Equipment - Polyethylene Pipes For Irrigation Laterals |
| 26 | IS 13487 | Irrigation Equipment- Emitters |
| 27 | IS 13488 | For Irrigation Equipment – Emitting Pipes Systems-Specification |
| 28 | IS 12701 | Rotational Moulded Polyethylene Water Storage Tanks - Specification (First Revision) |
| 29 | IS 2046 | Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets - Specification (Second Revision) |
| 30 | IS 1161 | Steel Tubes For Structural Purposes - Specification (Fifth Revision) |
| 31 | IS 4923 | Hollow Steel Sections For Structural Use - Specification (Third Revision) |
| 32 | IS 12592 | Precast Concrete Manhole Cover And Frame - Specification (First Revision) |
| 33 | IS 7466 | Rubber Gasket For Pressure Cooker - Specification ( Second Revision ) |
| 34 | IS 5382 | Rubber Seals Joint Rings For Water Supply Drainage And Sewerage Pipelines Specification For Materials ( Third Revision ) |
| 35 | IS 2925 | Specification For Industrial Safety Helmets (Second Revision) |
| 36 | IS 16205 | Conduit Systems For Cable Management Part 24 Particular Requirements Conduit Systems Buried Under Ground |
| 37 | IS 303 | Is 303: 2024 Plywood For General Purposes - Specification (Fourth Revision) ( Draft Second Amendment Of Is 303:2024) ( ICS 79.060.10) |
| 38 | IS 1659 | Block Boards - Specification (Fourth Revision) Amendment No - 3 |
| 39 | IS 710 | Marine Plywood - Specification (Third Revision) |
| 40 | IS 13095 | Butterfly Valves For General Purposes ( First Revision ) |
| 41 | IS 14845 | Resilient Seated Cast Iron Air Relief Valves For Water Works Purposes - Specification |
| 42 | IS 14846 | Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) - Specification |
| 43 | IS 5513 | Vicat Apparatus - Specification (Second Revision) |
| 44 | IS 5514 | Apparatus Used In `Le-Chatelier' Test - Specification (First Revision) |
| 45 | IS 5516 | Variable Flow Type Air - Permeability Apparatus (Blaine Type) - Specification (First Revision) |
| 46 | IS 10080 | Specification For Vibration Machine |
| 47 | IS 14858 | Compression Testing Machine Used For Testing Of Concrete And Mortar - Requirements |
| 48 | IS 3589 | Steel Pipes For Water And Sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
| 49 | IS 15652 | Insulation Mate |
| 50 | IS 14930 | Conduit System For Electrical |
| 51 | IS 16098 | Structured-Wall Plastics Piping Systems For Non-Pressure Drainage And Sewerage - Specification: Part 1 Pipes And Fittings With Smooth External Surface, Type A |
| 52 | IS 2185 | Specification For Concrete Masonry Units: Part 2 Hollow And Solid Lightweight Concrete Blocks (First Revision) |
| 53 | IS 3854 | Switches For Domestic And Similar Purposes - Specification (Third Revision) |
| 54 | IS 1293 | Plugs And Socket-Outlets For Household And Similar Purposes Of Rated Voltage Up To And Including 250 V And Rated Current Up To And Including 16 A - Specification ( Fourth Revision ) |
| 55 | IS 1741 | Latex Foam |
| 56 | IS 2089 | Canvas Tarpaulin |
| 57 | IS 13592 | Unplasticized Polyvinyl Chloride (PVC-U) Pipes For Soil And Waste Discharge System Inside And Outside Buildings Including Ventilation And Rainwater System |
| 58 | IS 4984 | Polyethylene Pipes For Water Supply |
| 59 | IS 4985 | Unplasticized PVC Pipes For Potable Water Supplies Specification Fourth Revision |
| 60 | IS 17425 | Irrigation Equipment-Quick Coupled Polyethylene Pipes And Fittings For Sprinkler Irrigation Systems |
| 61 | IS 16014 | Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses, Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire With Polymer Coating) —Specification |
| 62 | RDSO/2008/CG-01 | Schedule of Technical Requirements for vinyl coated upholstery fabric (artifical leather) for coaching stock conforming to EN 45545 HL3 for passenger coaches. |
| 63 | RDSO Spec No. C-K514 | Decorative Thermosetting Synthetic Resin Bonded Laminated (L.P.) Sheets Used In Railway Coaching Stock (AC And Non-AC Passenger Coaches) |
63 standards